yuu

wwq5536 发表于 2012-12-2 13:29
刷到那里，停了，拔下USB插头，重新插上，继续。

KANA SENSEI RAW等是刷不死的，何时停了，何时拔下来点 ...

你好，我跟楼主遇到的情况一样，我是个鼠标白痴。。本来想放弃了的，但是看到你说这些鼠标是刷不死的，就还是想试试，我的电脑是WIN7 64的系统，net framework 4.0, 官网下的鼠标驱动已经卸载了，  然后用官网下载的SSEFix_1.21.3.3，和老版本的SSEFix都试过，都是11%就提示cannot open bootloader device，拔了再插上点OK就停在11%不动了，再点进度条下面的那个OK就退出了，从头来过无数遍都是这个情况。请问这整个过程中还有什么别的事必须注意的吗？比如其他USB设备是否需要全部拔下？或者软件方面有什么说法的，求指点啊谢谢谢谢。。

烧什么烧什么

yuu 发表于 2013-4-27 20:11
你好，我跟楼主遇到的情况一样，我是个鼠标白痴。。本来想放弃了的，但是看到你说这些鼠标是刷不死的，就 ...

From SteelSeries Support

1. Refer to the picture in the link below and make sure that you are not plugged in to any of these places. The USB 3.0 port is OK to use but try using both a 3.0 port and 2.0 port. Since 3.0 provides more power, it may be the better alternative.
(发不了连接 图原内容是不能插电脑前的USB HUB或者任何USB HUB 因为电力不足)

NOTE: If you do plan to change ports, first uninstall the SteelSeries Engine with the devices plugged into their original ports that you had them plugged into during installation.

2. Make sure that your USB devices are set to be powered up at all times and that any power saving features are turned off.
Please refer to this thread for further information (steps 1 & 2 apply for all Windows OS, step 3 is ONLY for windows 7 users):


3. Kill the SteelSeries engine process (steps below)
a) ctrl-alt-del -> processes tab
b) Find SteelSeriesEngine.exe and select 'end process'

4. Download the following tool, right click -> run as administrator -> run the fix for your product


If it still doesn't work, try the FW Upgrade on another computer.

laizhaohan52

matrix819 发表于 2012-12-2 13:08
我的也是11%。。。

后来怎样解决的??

ldbzhuchen

大钢厂···返厂找技术被···